Need help?Do you have a question about the Titon HRV10 Q Plus and is the answer not in the manual?
General| Brand | Titon |
|---|---|
| Model | HRV10 Q Plus |
| Category | Test Equipment |
| Language | English |
Essential safety precautions and installation guidelines to be read before use.
Detailed physical dimensions and required clearance space for the HRV10 Q Plus unit.
Detailed physical dimensions and required clearance space for the HRV10M Q Plus unit.
Lists features for different Titon HRV Q Plus models based on part numbers.
Explanation of the auralite® remote LED indicator and its status lights.
Description of automatic ventilation rate reduction for energy saving.
Details on the standard continuous air flow running speed of the unit.
Configuration of increased air flow with an adjustable overrun timer.
Timer feature to prevent the unit from staying in Boost mode for too long.
How the unit vents fresh air directly during hot periods without preheating.
Optional facility for increased fan speed during Summer Bypass operation.
System to prevent ice formation within the heat cell during cold weather.
Monitors humidity and triggers Boost Speed when a set threshold is exceeded.
List of accessories included with the HRV10 Q Plus unit upon delivery.
Recommendations for secure wall mounting and unit placement considerations.
Requirements for connecting the unit's condensate drain to the dwelling's system.
Step-by-step instructions for connecting the 22mm O/D PVC pipe.
Guidelines for connecting Ø150mm ducting and ensuring proper airflow.
Information on accessing the electronics compartment for wiring.
Diagrams illustrating the wiring connections for the auralite® indicator.
Diagrams showing supply wiring and boost/humidistat connections.
Explanation of fan speed controls and potentiometers for initial setup.
Details on setting continuous and boost speeds, and program switch functions.
Procedure for adjusting continuous fan speeds using rotary potentiometers.
Procedure for adjusting boost fan speeds using rotary potentiometers.
How to set the overrun time for boost fan operation from 0 to 60 minutes.
Adjusting the humidity sensor's trigger point between 55%RH and 85%RH.
Step-by-step guide to reset the HRV10 Q Plus controller.
How to perform a hardware reset and its effect on settings.
General advice on periodic maintenance, excluding filter changes.
Instructions for safely removing and refitting the unit's front cover.
Steps for cleaning the heat exchanger and interior of the unit.
Best practices for cleaning the exterior of the ventilation unit.
Detailed instructions on how to slide out and replace the unit's filters.
How to reset the auralite® filter notification after replacing filters.
A log to record maintenance and service history for the unit.
To Next Page
