C-5000 Owner’s Manual
OwnC-C-3000 Manual
4
Approvals
This document requires following approvals:
Distribution
This document has been distributed to:
Titronics Customers
The manual is online, customers may call and request
previous versions, however in almost all cases the
customers take advantage of our automatic software
upgrades allowing the current manual and our tech
department to be very efficient and effective in handling
Titronics distributors and Agents
2/27/1998 Revision #2
Tytron C-3000 – first owner’s manual released -
covered installation and key functions of entering
patients and saving scans. A trouble shooting guide was
11/15/99 Rev 11
TyTron C-3000 Win 95/98 - was updated as software
functions and screen displays (NCM meter face for
indication of differential readings) and Fossa reading
10/1/2001 Rev 13
Tytron C-3000 Win 95/98/ME/2000/XP installation
instructions added for the new versions of Windows
operating platforms. Finding com port numbers and
checking connections was made easier with newer user
interface screens. Importing and Exporting of patient
data base scans was made to be user friendly.
3/11/2019 PM.B.004.K1903
Operation and indication of use of the C-5000 was
identical to that of the C-3000. The software is still
referred to s the C-3000 Tytron Software. Manual
revisions reflected added features, especially reports and
types of graphic displays that could be chosen
(displaying temperature data over a back or x-ray image
Vice President – software engineer
To Next Page