EasyManua.ls Logo

TITTLA KMBR150 - User Manual

Default Icon
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTRUCTION MANUAL
BUILT-IN BEVERAGE COOLER
MODEL: KMBR150
support@tittla.com
1(510)228-4672
R

Questions and Answers

  • R
    Robert ChavezAug 13, 2025
    Why is my TITTLA KMBR150 not cold enough?
    • S
      Shannon HardinAug 13, 2025
      If the TITTLA Freezer is not cold enough, try these steps: * Set a colder temperature and allow several hours for it to stabilize, as the external environment may require a higher setting. * If the freezer was recently disconnected, it can take 3-4 hours to cool down completely. * Avoid frequent door openings. * Ensure the door is closed completely. * Check the door gasket and clean or replace it if necessary to ensure a proper seal.
  • E
    Edward HernandezAug 17, 2025
    Why does the compressor on my TITTLA Freezer turn on and off frequently?
    • J
      Janet WigginsAug 17, 2025
      If your TITTLA Freezer's compressor turns on and off frequently, it could be due to several reasons: * The room temperature being hotter than normal, which is normal for the cooler to work harder. * A large amount of contents has been added, causing the cooler to run more until the desired temperature is reached. * Frequent door openings. * Incorrect temperature settings, so check and set the temperature properly. * The door not being closed completely. * The door gasket not sealing properly; check, clean, or change the gasket if needed.
  • J
    Jeff OwensAug 20, 2025
    How to fix a TITTLA KMBR150 that does not run?
    • M
      Matthew WigginsAug 20, 2025
      If your TITTLA Freezer does not run, ensure it is properly plugged in and turned on. Also, check the house fuse or circuit breaker and replace or reset if necessary.
  • S
    Sean BarajasAug 25, 2025
    What to do if the door of my TITTLA KMBR150 Freezer will not close properly?
    • C
      candacerodriguezAug 26, 2025
      If the door of your TITTLA Freezer won't close properly, make sure the cooler is level. If you reversed the door, reinstall it correctly. Also, clean the door gasket and ensure the shelves are positioned correctly.
  • J
    johnbriggsAug 28, 2025
    Why does my TITTLA Freezer make too much noise?
    • K
      Kristin JohnsonAug 28, 2025
      If your TITTLA Freezer seems to make too much noise, level the cooler. The rattling noise may come from the flow of the refrigerant, which is normal. As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your cooler. Contraction and expansion of the inside walls may cause popping and crackling noises.
  • W
    William ChavezAug 31, 2025
    Why is there moisture build up on my TITTLA KMBR150?
    • M
      Michael TranAug 31, 2025
      If you notice moisture build-up on the interior or exterior of your TITTLA Freezer, this is normal during high humidity periods; try to lower the room humidity. It's also normal in high-temperature environments; move the cooler to a cooler place, away from heat and sunlight. Avoid frequent door openings, and check door gaskets for a proper seal.
  • B
    Bruce LoweSep 4, 2025
    How to fix the light on my TITTLA KMBR150 Freezer?
    • M
      Michele HensleySep 4, 2025
      If the light in your TITTLA Freezer does not work, first ensure the cooler is plugged in. Then, check the circuit breaker and fuses. Finally, make sure the light button is turned “ON”.
  • E
    Emily FergusonSep 8, 2025
    How to stop TITTLA KMBR150 Freezer vibrations?
    • G
      garciaraymondSep 8, 2025
      To address vibrations in your TITTLA Freezer, ensure the cooler is level. Also, make sure the bottles inside don’t touch each other, and remove any objects from under the cooler.

Summary

Important Safety Instructions

Specific Warnings and Hazards

Product Diagram

Installation Instructions

Before Using Your Beverage Cooler

Steps to take before connecting and operating the beverage cooler for the first time.

Install Stainless Steel Handle

Procedure for attaching the stainless steel handle to the beverage cooler door.

Cooler Placement Guidelines

Guidelines for positioning the beverage cooler for optimal performance and stability.

Electrical Connection Requirements

Specific requirements for connecting the beverage cooler to an electrical power source.

Operation Instructions

Controls Overview

Explanation of the beverage cooler's control panel functions and buttons.

Storage and Door Lock

Guidance on storing items and securing the cooler with the provided lock and key.

Shelves Removal

Instructions on how to remove the shelves from the beverage cooler's tracks.

Care and Maintenance

Cleaning Procedures

Steps for cleaning the interior and exterior of the beverage cooler safely and effectively.

Power Failure and Vacation

Recommendations for handling power outages and preparing the cooler for extended periods of non-use.

Moving and Energy Saving

Tips for safely moving the cooler and conserving energy during operation.

Troubleshooting Guide

Warranty Information

Warranty Terms and Exclusions

Details on the warranty period, coverage, and specific items excluded from warranty.

Claim Procedure and Contact

Steps for filing a warranty claim and contact information for customer support.

TITTLA KMBR150 Specifications

General IconGeneral
BrandTITTLA
ModelKMBR150
CategoryFreezer
LanguageEnglish

Related product manuals