TKE EOX - Page 13

E
T
O
N
V
O
I
C
E
B
L
U
E
B
L
U
E
13
EOX ELEVATOR OWNER’S GUIDE


Hoistway enable keyswitch
Used for inspection mode.
Inspection keyswitch
Used for inspection mode.
Run/stop keyswitch
For emergency stop in
the hoistway (no alarm bell
is activated).
Hoistway access keyswitch
Gives access for inspectors from hall.
Lobby park keyswitch
Allows a programmable number of
elevators to return to the lobby and
park, when in the “ON” position.
Hall call registration keyswitch
Allows authorized personnel to register an
up or down hall call.
Code blue keyswitch
Mounted in hall station to call the

an emergency.
Voice tone keyswitch
Allows authorized personnel to





Emergency power keyswitch
Provides in-car control over the elevator. When
the keyswitch is in the “ON” position, the
elevator will be controlled by the attendant and
will not respond to hall requests. The keyswitch,
when in the “ON” position, will be overridden by

stop, etc.).
Attendant service keyswitch
Provides in-car control over the elevator. When
the keyswitch is in the “ON” position, the elevator
will be controlled by the attendant and will not
respond to hall requests. The keyswitch, when in
the “ON” position, will be overridden by emergency
