TKR Group VAS 6790/1 User Manual

VAS 6790
VAS 6790/1
VAS 6791
BA2
Translation of the original instructions
Pneumatic/hydraulic
blind riveting tool
Setup – Installation: Rivet clamp
ATTENTION
This supplementary sheet serves as a supplement to the instruction manual BA1
(VAS 6790/2, VAS 6792, VAS 6792/1, VAS 6792/2) and may only be used in
conjunction with it.
Additional information to the instruction manual
BA1 (VAS 6790/2, VAS 6792, VAS 6792/1, VAS 6792/2)

TKR Group VAS 6790/1 Specifications

General

Brand	TKR Group
Model	VAS 6790/1
Category	Rivet Tools
Language	English

Summary

Safety

Designations

Explains markings and symbols on the rivet clamp for safe operation.

Technical Data

Scope of Supply

Lists components included in the rivet clamp set for initial setup.

Technical Specifications

Details environmental conditions and required safety clothing for tool operation.

Rivet Clamp Technical Data

Provides dimensions and specifications for different rivet clamp models.

Screw Needle Technical Data

Details specifications and types of screw needles available for different applications.

Rivet Insert Overview

Illustrates and identifies various rivet insert types and their article numbers.

Application

Connecting the Rivet Clamp

Guides on how to connect the rivet clamp to the pressure generator for operation.

Inserting the Riveting Tool

Instructions for inserting rivet inserts and counter-pieces into the tool.

Areas of Application

Details specific applications for various rivet types and tool combinations.

Checking Riveting Results

Procedures for verifying the quality and correctness of riveting operations.

Cleaning the Riveting Tools

Provides instructions on how to clean and maintain the riveting tools after use.

Ending the Operation

Describes the proper procedure for disconnecting and storing the equipment safely.