To Next PageTo Next Page
Need help?Do you have a question about the TKT T2000-TFC-02 and is the answer not in the manual?
General overview of the T2000 series portable oil/water interface detector.
Detailed specifications for the T2000-TFC-02 model, including accuracy, tape length, and dimensions.
Information on materials used and the coating applied to the T2000-TFC-02 probe body.
Introduces the equipment and explains the manual's warning/caution markings for safe operation.
Illustrates the application and use of the T2000-TFC-02 model in tank gauging.
Identifies and describes the various controls and components of the portable measuring device.
Instructions on how to select the temperature display mode (°C or °F) on the device.
Explains the low battery warning indicator and the need for replacement in a safe area.
Details the composition and protective features of the tape used in the T2000 series.
Explains the ultrasonic detection method for ullage and the gas-oil boundary.
Describes interface detection via conductivity and temperature sensing using RTD.
Provides a guide on how to read ullage and interface levels from the instrument's measurements.
Step-by-step instructions for installing and performing measurements with the device.
Addresses issues with the device showing no display or sound, checking battery and fuse.
Covers scenarios where the display shows temperature but no beep, checking buzzer and cables.
Troubleshoots 'ERROR' messages by checking cable connections, probe, and tape integrity.
Solutions for a dim display, involving LCD contrast adjustment.
Guidance on cleaning electrodes to restore conductivity sensitivity, avoiding abrasive tools.
Explains causes of abnormal characters due to interference and system reset.
Addresses tape friction problems and suggests loosening the gland seal for smoother movement.
General| Brand | TKT |
|---|---|
| Model | T2000-TFC-02 |
| Category | Measuring Instruments |
| Language | English |
