Bargraph Meters:
Switchable to output level or compression,
0dB = +4dBu.
Outputs: Electronically balanced, unbalanced compatible.
Output impedance 47 ohms.
Maximum level +26dBu.
3 pin male XLR connector.
Unbalanced Outputs:
Output impedance 47 ohms.
Maximum level +18dBu into 10Kohms.
2 pole 0.25” jack socket.
Frequency Response:
10Hz to 40KHz, +0, -1dB.
Noise: -82dBu (22Hz - 22KHz).
Dynamic Range:
108dB.
Sidechain Insertion Points:
Unbalanced, switched 3 pin jack socket, tip = send,
ring = return.
Nominal level -2dBu.
Output impedance 47 ohms.
Return input impedance 10Kohms.
Power Requirements:
To Next Page
Loading...