EasyManua.ls Logo

TMC Pro Clear Ultima 30 - User Manual

Default Icon
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
24
Pro Clear Ultima instructions v.1 2015_Pro Clear Adv instructions 24/12/2014 12:55 Page 2
Question and Answer IconNeed help?

Do you have a question about the TMC Pro Clear Ultima 30 and is the answer not in the manual?

Summary

Important Safety Guidelines

Electrical Isolation Before Maintenance

Always disconnect the unit from mains electricity before any maintenance is performed.

Responsible Unit Disposal

Dispose of the unit responsibly, checking local authority for information on UVC bulb disposal.

User Capability Limitations

Appliance not for persons with reduced capabilities unless supervised by a responsible adult.

Damaged Power Cord Replacement

Damaged supply cords must be replaced by manufacturer or qualified personnel to avoid hazards.

Installation and Operation Instructions

General Safety Advice

Consult electrician, avoid direct UV lamp viewing, do not run dry, isolate power before maintenance.

Product Information and Compliance

Details CE approval, directives, and compliance standards for the unit.

Unit Positioning Guidance

Guidance on placing the unit, whether on a raised surface or attached horizontally to a wall.

Horizontal Mounting Instructions

Specific steps for mounting the unit securely on a flat horizontal surface.

Installation Procedures

Vertical Wall Mounting

Instructions for mounting the unit horizontally onto a vertical surface using brackets.

Water Supply Connection Methods

Details connecting with flexible hose or rigid pipe, including hosetail trimming.

Flow Rate Specifications

Maximum flow rates for Pro Clear Ultima 30 and 55 models for optimal pond turnover.

System Pressure Limits

Unit designed for pond pumps operating within 0.7 bar pressure; seek dealer advice if abnormal.

Electrical and Maintenance Procedures

Electrical Connection Requirements

Permanently wire via RCD and double pole fused spur with 3 amp fuse.

Routine Maintenance Schedule

UV lamp life ~8000 hours; replace annually; clean quartz sleeve 2-3 times seasonally.

Lamp and Quartz Sleeve Care

Steps for removing, cleaning, and replacing the UV lamp and quartz sleeve.

Unit Assembly Guide

Guide for reassembling unit after maintenance, ensuring secure "O" rings and fittings.

Troubleshooting and Usage Advice

Troubleshooting Common Issues

Covers checking operation, pond clarity timeline, lamp/sleeve problems, and recurring green water.

Pond Life and Treatment Compatibility

Explains UV unit does not harm pond life and compatibility with treatments, with potential breakdown of meds.

Operational Guidelines and Safety

Advice on continuous running periods, avoiding underground burial, and Koi impact on water clarity.

Guarantee and Model Selection

Guarantee Information

24-month guarantee excludes serviceable parts like lamp and quartz sleeve.

Model Selection Guide

Table to select the correct Pro Clear model (UV6 to UV55) based on pond volume for optimal performance.

TMC Pro Clear Ultima 30 Specifications

General IconGeneral
BrandTMC
ModelPro Clear Ultima 30
CategorySwimming Pool Vacuum
LanguageEnglish

Related product manuals