8
When the Reef Pump Compact is switched on, the LCD screen on the controller will display
To increase the speed of the pump press the INTENSITY button until you reach the required level (maximum level will be
displayed on the LCD screen as
To decrease keep pressing the Intensity button to loop to reach the speed desired.
Feed Mode
Press FEED to pause pump operation for 10 minutes. When you enter FEED mode the LCD screen on the controller will display
The controller will then start a 10 minute countdown which will be displayed on the LCD screen of the controller, starting at and
counting down in minutes to
and so on until it displays 00, at which point the 10 minutes have elapsed and the pump will resume operation and start pumping.
If you wish to restart the pump before the end of the 10 minute pause, press FEED again and the pump will restart.
CONSTANT STREAM MODE
FEED MODE
LEVEL DISPLAY 01: Min. power 10: Max. power
Variable Speed Control
With 10 different speed settings to allow precise adjustment of water flow and optimum performance.
OPERATION OF THE DC CONTROLLER : 500 and 1500
To Next Page
Loading...
