TMC V2Skim Series - User Manual

INSTRUCTIONS FOR INSTALLATION AND USE
Important Safety Information - Please Read Carefully
- This skimmer is supplied with a high performance pump. Please read
carefully the safety information supplied with the pump before installing.
- Always isolate the pump from the mains electricity before installing or carrying out
any maintenance to the skimmer.
- Power to the pump must be supplied through a Residual Current Device (RCD) with
a rated residual operating current not exceeding 30mA.
- The pump is designed to run completely submerged in water - do not run the pump dry.
- To ensure the pump continues to maintain a steady water flow, it must be cleaned
regularly to ensure it does not become clogged with debris or detritus.
- Pump rating: 220-240V, 50Hz unless marked otherwise.
- Do not operate any appliance if it has a damaged cord or plug, if it is malfunctioning,
or if it has been dropped or damaged in any way.
- This unit is designed to be used indoors and is not suitable for any outdoor
applications.
- Ensure the skimmer is securely installed before operating.
- Always leave a drip-loop in the pump cable to prevent water running down
the cable and reaching the power source (see picture below).
- Dispose of this unit responsibly. Check with your local authority for disposal
information.
Drip-loop
Pump
Aquarium
V
2
Bubble Stop
!
Protein Skimmers
Typical Installation

TMC V2Skim Series Specifications

General

Pump Included	Yes
Adjustable Air Intake	Yes
Collection Cup	Yes
Category	Protein Skimmer
Type	Protein Skimmer
Model	V2Skim Series

Summary

Important Safety Information

Parts List

Dimensions

Assembly Instructions

Skimmer Assembly

Steps for assembling the main components of the protein skimmer.

V2 Bubble Stop Assembly

Instructions for assembling the V2Bubble Stop unit.

Installation

Hang-On Installation

Guidance for mounting the skimmer externally on an aquarium.

In Sump;Aquarium Installation

Instructions for installing the skimmer internally within a sump or aquarium.

Operation

Initial Operation

Steps and considerations for the first time the skimmer is switched on.

Dry Skimming

Method for achieving dry foam for waste collection.

Wet Skimming

Method for achieving wet foam for waste collection.

Use with Ozone

Guidelines for using the skimmer in conjunction with an ozone generator.

Maintenance

Routine Maintenance Procedures

Regular cleaning and checks for optimal skimmer performance.

Trouble Shooting

Skimmer Not Working Properly

Diagnosing and resolving issues when the skimmer is not functioning.

Skimmer Water Level Fluctuates

Addressing inconsistencies in the skimmer's water level.

Pump Not Operating Correctly

Troubleshooting the pump unit for operational failures.

No Air Bubbles Produced

Resolving issues with insufficient air intake or venturi blockage.

No Foam Produced

Diagnosing causes for the absence of foam in the collection cup.

Water Overflowing into Collection Cup

Solutions for excessive water overflow into the collection cup.

Aquarium Volumes and Flow Rates