Don't revolve
engine in high
speed when in idle speed
BRAKE
Use front and rear
brake to adjust
speed.
-
In order to
gain
the
max. speed, driver
should close throttle, use
front
& rear brake correctly.
Grasp clutch
lever before
stop
to
avoid engine
stop.qby
,
It will decrease
the brake
performance
if driver use brake bar
or
rear brake pedal
alone.
Please
brake and close throttle
in advance before turning. It will
lead
to miss under control if driver
brake
during
tuming.
Drive
and brake
performance
will decrease when driving in damp
& rain
situation. Driver
should be careful in
this
situadon.
Please
shift to lower
gear
when
you
driving down the slope.
'
If driver
step to the rear
brake
pedal
or
grasp
the brake bar when
driving,
it will send wrong information
to
other
ddvers, also will lead
the brake device too hot, decrease
its effect.
.
STOP
1.Turn
on the turnsignal
in advance when
driver
are close
to
parking
place
to
remind the back and side
vehicles.
Close the throttle,
use front & rear
brake
in advance,
stop
slowly.
1'1
To Next Page
Loading...