TMEC 200-1 - RUNNING AND GEAR SHIFTING

Start
process:
High
temperature: 35"C
(95F)
or above
1.do
not use throttle
lever
2.revolve throttle
118
-
I/4,
press
start
button,
start engine.
Low temperature:
10"C
(50F)
or lower
1 according
to the front
four steps in
normal temperature.
2.continue
to heat engine
until the throttle
lever
to close
position'
RTINNING
Please make sure
that
you
are
familiar with
the side stand
strxcture.
1.user can drive
vehicle after
heating engine.
2.when
engine is in at
idle speed,
grasp clutch
lever, step shift
pedal
ro be at
low speed.
3.loose
clutch
lever, open throttle,
increase engine
speed,
the coordinate of throttle and
clutch lever
will insure
stafiing stably.
4.when
motorcycle
reaches the available
speed,
close throttle,
grasp
clutch
lever, step shift
pedal
to
be at
2nd
speed.
Repeat this
step to 3rd,4th,
the highest
speed.
5.drive up shift
pedal
means shift
to higher
gear,
step
down shift
pedal
means shift
to lower
gear. Loose it, the
shift
pedal will retum to horizontal
position.
Don't shift
gear
when shift
pedal
clench
or throttle
has not closed.
Don't move vehicle
for long distance
when
the engine
closes.
to