To Next PageTo Next Page
Need help?Do you have a question about the TMG TMG-HW41R and is the answer not in the manual?
Details the functions of the HOT WATER, RESET, and THERMOSTAT switches.
Explains the meaning of BURNER ON, FUEL, and IGNITION indicator lights.
Instructions for applying chemicals using the downstream injection system.
Details on maintaining the oil burner, including filter and nozzle replacement.
Covers general upkeep, winterization, and water condition advice.
Guidance on using water softeners for optimal performance and preventing scale.
Procedure for removing scale buildup from the heater coil.
Daily and weekly checks and recommendations for pump maintenance.
Daily and weekly checks for the gasoline engine's upkeep.
Schedule for engine oil changes and replacement of spark plugs and air filters.
Guidance on electrode setting and cleaning the flame detector.
Troubleshooting steps for when the gas engine fails to start.
Identifies causes and solutions for complete lack of water flow.
Troubleshooting for situations with low pressure but sufficient flow.
Diagnoses and resolves issues with both low pressure and low flow.
Addresses problems where the unloader fails to release pressure correctly.
Troubleshooting for intermittent pressure changes caused by the unloader.
Diagnosing issues where the unloader results in low output volume.
Identifies and resolves leaks originating from the water inlet connections.
Troubleshooting leaks associated with the trigger gun and spray nozzle.
Diagnosing and fixing leaks from the unloader and pressure relief valve.
Resolves issues where no water flows from the nozzle when the trigger is pulled.
Addresses excessive pressure spikes occurring after the trigger is released.
Troubleshooting steps for when the chemical injection system fails to deliver.
Diagnosing and resolving issues related to insufficient fuel supply to the burner.
Troubleshooting contaminated fuel, clogged filters, or fuel lines.
Diagnosing problems with the solenoid coil not energizing or energizing incorrectly.
Troubleshooting when the pressure switch activates or fails to activate correctly.
Details the functions of the HOT WATER, RESET, and THERMOSTAT switches.
Explains the meaning of BURNER ON, FUEL, and IGNITION indicator lights.
Instructions for applying chemicals using the downstream injection system.
Details on maintaining the oil burner, including filter and nozzle replacement.
Covers general upkeep, winterization, and water condition advice.
Guidance on using water softeners for optimal performance and preventing scale.
Procedure for removing scale buildup from the heater coil.
Daily and weekly checks and recommendations for pump maintenance.
Daily and weekly checks for the gasoline engine's upkeep.
Schedule for engine oil changes and replacement of spark plugs and air filters.
Guidance on electrode setting and cleaning the flame detector.
Troubleshooting steps for when the gas engine fails to start.
Identifies causes and solutions for complete lack of water flow.
Troubleshooting for situations with low pressure but sufficient flow.
Diagnoses and resolves issues with both low pressure and low flow.
Addresses problems where the unloader fails to release pressure correctly.
Troubleshooting for intermittent pressure changes caused by the unloader.
Diagnosing issues where the unloader results in low output volume.
Identifies and resolves leaks originating from the water inlet connections.
Troubleshooting leaks associated with the trigger gun and spray nozzle.
Diagnosing and fixing leaks from the unloader and pressure relief valve.
Resolves issues where no water flows from the nozzle when the trigger is pulled.
Addresses excessive pressure spikes occurring after the trigger is released.
Troubleshooting steps for when the chemical injection system fails to deliver.
Diagnosing and resolving issues related to insufficient fuel supply to the burner.
Troubleshooting contaminated fuel, clogged filters, or fuel lines.
Diagnosing problems with the solenoid coil not energizing or energizing incorrectly.
Troubleshooting when the pressure switch activates or fails to activate correctly.
General| Brand | TMG |
|---|---|
| Model | TMG-HW41R |
| Category | Pressure Washer |
| Language | English |
