TMG TMG-MS0608 - User Manual

Need help?

Do you have a question about the TMG TMG-MS0608 and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features
Assembly and Installation Considerations

This document is a product manual for the TMG-MS0608 6'x 8' Apex Metal Shed, manufactured by TMG Industrial. It provides comprehensive instructions for assembly, a parts list, and important safety and planning information.

Function Description:

The TMG-MS0608 is a compact, apex-roofed metal shed designed for outdoor storage. Its primary function is to provide a secure and weather-resistant space for tools, gardening equipment, and other outdoor items. The apex roof design facilitates water runoff, preventing accumulation and potential damage. The shed features a double-door entry for easy access to stored items.

Important Technical Specifications:

Model Number: TMG-MS0608
Dimensions: 6' x 8' (approximately 183 cm x 244 cm)
Overall Dimensions (assembled):
- Width: 2260mm (approximately 7.4 ft)
- Depth: 1620mm (approximately 5.3 ft)
Roof Type: Apex
Material: Metal (specific type not detailed, but implied to be steel sheets from assembly instructions)
Door Type: Double door (swinging outward)
Fasteners: A variety of screws (F1, F2, F3) and nuts (S2, S3) are used for assembly.
Panel Types: Includes various wall panels (P1, P2, P3, P4), roof panels (P5, P6, P7), and door panels (D1, D2).
Frame Components: A comprehensive set of numbered frame parts (1L, 1R, 2L, 2R, etc.) are used to construct the base, walls, and roof structure.
Accessories: Includes door handles (GD), door stoppers (GE), and door guides (GB).

Usage Features:

Storage Capacity: The 6'x 8' footprint offers a practical amount of space for typical backyard storage needs.
Double Door Entry: The two swinging doors provide a wide opening, making it easier to move larger items in and out of the shed.
Weather Resistance: Constructed from metal, the shed is designed to withstand outdoor elements, protecting contents from rain, sun, and wind. The apex roof aids in efficient water drainage.
Security: Once assembled, the shed provides a lockable space (lock not included, but implied by door design) to secure stored items.
DIY Assembly: The shed is designed for self-assembly, with detailed step-by-step instructions provided in the manual.
Foundation Requirement: The manual emphasizes the need for a level and firm base (concrete pad, treated timber, bricks, or blocks) for optimal stability and to prevent moisture ingress. It is not designed to be built directly on a lawn.

Maintenance Features:

Regular Cleaning: The manual advises regular cleaning, especially if located under overhanging trees, to remove leaves and debris from the roof and exterior.
Base Maintenance: Ensuring the base remains level and free from moisture is crucial for the shed's longevity. If a concrete pad is used, it should slope towards the edges to prevent water pooling.
Fastener Checks: Periodically checking and tightening all nuts and fasteners is recommended to maintain structural integrity and prevent loosening over time.
Rust Prevention (Implied): As a metal shed, it is likely to have a protective coating (e.g., galvanized steel or paint) to resist rust. Any damage to this coating should be addressed promptly to prevent corrosion.
Panel Replacement (Implied): In case of damage, individual panels or frame components may be replaceable, though specific instructions for this are not detailed in the provided excerpts.

Assembly and Installation Considerations:

Two-Person Assembly: The manual strongly recommends that two people work together for assembly, as some steps require lifting structures and coordinating parts. It estimates a full day for completion.
Weather Conditions: Assembly should ideally be performed on a dry and calm day. Windy conditions are explicitly warned against due to the risk of damage to panels and personal injury.
Site Preparation: A level site is critical for proper assembly and long-term stability. The base must be square and level to ensure holes align correctly.
Tools Required: The manual illustrates common hand tools such as gloves, screwdrivers, wrenches, drills, and a spirit level, indicating that these are necessary for assembly. Heavy-duty gloves are specifically recommended for handling steel sheets.
Parts Verification: Users are instructed to check all parts against the provided list before commencing assembly and to separate contents by part number. Extra fasteners are supplied for convenience.
Support: TMG Industrial provides a toll-free number (1-877-761-2819) and email (cs@tmgindustrial.com) for missing parts or assembly questions, advising against returning the product to the dealer.
Building Approval: Users are advised to contact their local government authority to determine if building approval is required prior to installation.