TMG TMG-MS2533 - User Manual

• Please read and understand the product manual completely before assembly
• Check against the parts list to make sure all parts are received
• Wear proper safety goggles or other protective gears while in assembly
• Do not return the product to dealer. They are not equipped to handle your requests.
WARNING
This structure is intended for temporary outdoor storage use only. It is not designed to
withstand heavy snow and wind loads and does not come with engineering drawings.
To ensure suitable for your specific weather needs, it is your responsibility to verify
their appropriateness for your intended use and local weather conditions, especially in
areas prone to severe weather.
Missing parts or have questions on assembly?
Please call: 1-877-761-2819 or email: cs@tmgindustrial.com

Summary

Assembly Preparation and Safety

Essential Tools and Setup Procedures

Parts Identification and Inventory

Complete Parts List with Quantities

Comprehensive list of all parts, their numbers, and quantities required for each model.

Framework Assembly: Initial Stages

Framework Assembly Types A1 to A4

Details for assembling framework components of type A1 through A4.

Framework Assembly Types A5 to A9

Details for assembling framework components of type A5L, A5R, A6R, A6L, A7, A8, A9.

Framework Assembly: Step-by-Step

Steps One and Two: Framework Construction

Step-by-step instructions for assembling the initial phases of the main structural framework.

Step Three and Model-Specific Completion

Final framework assembly steps and guidance for completing assembly based on shed models.

Wall Cladding Installation

Installing Front and Back Wall Tiles

Main Door Assembly

Door Assembly Steps 1 and 2

Door Assembly Steps 3 and 4

Advanced Framework Assembly Details

Framework Integration with Specific Parts

Final Framework Component Connections

TMG TMG-MS2533 Specifications

General

Brand	TMG
Model	TMG-MS2533
Category	Outdoor Storage
Language	English