TO THE OWNER
GENERAL COMMENTS
Congratulations for having this brush cutter! Your cutter was carefully
designed and manufactured to give you years of dependable service. Your
cutter will require some minor maintenance(such as cleaning) to keep it in top
working condition. Be sure to observe all safety precautions and maintenance
procedures as described in this
manual.
ABOUT THIS MANAL
This manual has been designed to help you do a better and safer job. Read this
manual carefully and become familiar with its contents. Remember, never let
anyone operate this unit without reading the "Safety Precautions" and
"Operation Instructions" sections of this manual. Unless noted otherwise, right
and left sides are determined from the position of the skid steer operator sitting
in the seat facing forward.
SERVICE
When service your brush cutter, pls. remember to use only manufacturer
replacement parts. Substitute parts may not meet the standards required for
safe, dependable operation. To facilitate parts ordering, pls. record the model
No. and serial No. of the metal plate on your unit.
W W W. T M G I N D U S T R I A L . C O M P 2 / 13 T o l l F r e e : 1 - 877- 761- 2819
To Next Page
Loading...