TMG TMG-SP75 - INTENDED USE; TECHNICAL SPECIFICATIONS

INTENDED USE
This Shop Press is designed for automotive, truck, implement, fleet, and industrial repair shops where
pressing, bending, straightening and forming, is required. Typical applications include installation and
removal of alternator and power steering pump bearings, axle bearings, transmission bearings, seals,
u-joints and many other jobs.
TECHNICAL SPECIFICATIONS
Description
Item
TMG-SP75
Capacity
75 Ton
Working Press(PSI)
100-125
Air Inlet Size(in.ZG)
1/4
Work Range（in.）
2-7/8
”
-31-5/8
”
Stroke Length(in.)
10〞
Working Width(in.)
30〞
Dimensions L x W x H
49 3/16 x 31 1/2 x 65 5/16
Foot Switch Included
NO
Winch Included
YES
Safe Operating Temperature is between -20°F – 105°F (-28°C - 41°C)
W W W . T M G I N D U S T R I A L . C O M P 2 / 2 0 T o l l F r e e : 1 - 8 7 7 - 7 6 1 - 2 8 1 9