REV.JUL20881_PS881EX_en_US
2. Place stick on the charger, insert batteries, press
the button to activate your charger and the stick will
start charging. Please charge the stick for a
minimum of 2 hours before your first use.
3. Press the button on the charger to activate the
stick. Select the stick in your App and choose your
desired cook.
4. You can NOW remove the stick from the charger
and insert it completely into the meat, up to the
ceramic handle. The stick should be in the thickest
part, away from fat and bones.
5. The charger LED will continue to flash indicating
range extender mode is active. Keep the charger
within 3 feet of your stick to extend the range.
Once your cook is ready, let your meat rest and carefully
remove the stick from the meat. Be careful it might be hot!
6. After enjoying your meat, allow the stick to cool
down, then clean it to look like new and replace on
charger. It will auto turn off when not in use.
7. The stick will auto-charge while on the charger so
it's ready to use for your next cook.
1. Open your preferred mobile app store. Search and
download "The MeatStick® App" . You can also find
these instructions on the app.
FIRST TIME SETUP
(2 AA batteries not included)
#
#
#
#
Smallest Wireless Meat Thermometer
Thank you for choosing MiniX by TMS
If you need help, please contact support:
support@themeatstick.com
#mymeatstick
The LED light will turn off after the stick is completely charged.
The MeatStick®
To Next Page
Need help?
General