Need help?Do you have a question about the TMT HUSKY500 and is the answer not in the manual?
Visual guide showing the placement of gate opener components and accessories.
Explains the main parts of the gate opener, identified by letters a, b, c, d.
Provides detailed physical dimensions of the gate opener unit with diagrams.
Illustrates the process of installing the motor and its associated gear rack.
Details how to check if the gate installation has been performed correctly.
Step-by-step procedure for manually releasing the gate opener in emergencies.
Explains how to configure the power supply using SW1 dip switches.
Details the configuration for photocell functionality using SW2-1.
Describes how to adjust the flashing light behavior via SW2-2.
Configuration for the automatic gate closing feature using SW2-3.
Setting the gate's closing direction using SW2-4.
Instructions for adjusting torque and over-current using VR1 and VR2 knobs.
Guide on how to pair remote controls and clear their memory.
Process for the system to learn gate limits and operation parameters.
Explains the meaning of different LED status lights on the control board.
Details how photocells affect gate operation in various scenarios.
Describes the gate's deceleration behavior during its movement.
Instructions on how to operate the gate using the remote control buttons.
Explains the logic behind gate movement, stopping, and reversal.
Provides performance specifications for different Husky series models.
Details specifications for the TM3 transmitter.
General| Brand | TMT |
|---|---|
| Model | HUSKY500 |
| Category | Gate Opener |
| Language | English |
To Next Page
