EasyManua.ls Logo

Toa 380-SE - Technical Specifications; Enclosure and Speaker Details; Performance Characteristics; Physical Attributes

Toa 380-SE
2 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
Enclosure:
Vented (bass reflex) type
Speakers:
Low Frequency, 15" woofer
Mid Frequency, CD Horn plus compression driver
High Frequency, Horn tweeter
Power Handling Capacity
Continuous Pink Noise:
120 watts RMS of band-limited pink noise
(50 Hz~20 kHz)
Continuous Program:
360 watts
Impedance:
8 ohms
Sensitivity:
102 dB (1W/1m)
Input Panel
Frequency Response:
50 Hz~20 kHz
Crossover Frequencies:
800 Hz, 8 kHz
High and Mid Frequencies Level Controls:
0~ –10 dB (with an "OFF" position)
Input Terminals:
¼" Phone jacks for a full-range, biamp, triamp and
chaining
Finish (Enclosure):
Polyester in grey color
Dimensions:
758(H)X498(W)X410(D)-mm
29.8(H)X19.6(W)X16.1(D) inches
Weight:
36 kg
(79.2
Ibs)
FULL RANGE INPUT
Connects to the output of power amplifier. This is the input
jack when used as a full range speaker system.
MULTI-AMP (3-WAY) INPUTS
Connects to corresponding power amplifiers for high, mid
and low frequency ranges when driving the speaker
system with multi-amp operation.
BI-AMP INPUTS
Connects to corresponding power amplifiers for high/mid
and low frequency ranges when, driving the speaker
system with bi-amp operation.
Level Controls
FULL RANGE OUTPUT
Make bridge connection of this output to the full range
input of another system when driving two speaker
systems with one power amplifier.
MULTI-AMP (3-WAY) OUTPUTS
For bridge connection of multi-amp operation.
BI-AMP OUTPUTS
For bridge connection of bi-amp operation.
CAUTION:
DO NOT USE THE BI-AMP AND MULTI-AMP JACKS
UNLESS THE SPEAKER SYSTEM IS DRIVEN UNDER
Bl- AND MULTI-AMPLIFIERED SYSTEM. CON-
NECTING THE AMPLIFIER OUTPUT FOR THE FULL
RANGE TO THE MULTI- AND BI-AMP INPUT JACKS
MAY DAMAGE THE SPEAKER.
MID FREQUENCY LEVEL CONTROL
HIGH FREQUENCY LEVEL CONTROL
Adjusts the sound level of the mid and high
frequencies when driving the speaker system as a
full range speaker system. Make the level setting
according to the environmental conditions, although
almost flat frequency response is obtainable so far
as the level controls remain within the "NORMAL"
ranges.
Frequency
Response
(1W/1m: Swept 1/3 Octave Pink Noise)
: Mid & high level controls at NORMAL position
: Mid & high level controls at MAX position
TOA ELECTRIC CO., LTD.
KOBE
JAPAN
133-01-177-30

Related product manuals