Toa HX-7B - User Manual

OPERATING INSTRUCTIONS
SPEAKER SYSTEMS HX-7B
HX-7W
HX-7B-WP
HX-7W-WP
Thank you for purchasing TOA’s Speaker Systems.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
When using the speaker as shipped from the factory, be sure
to retighten the bolts holding the rear-mounted brackets with a
designated tightening torque. (See p. 8, "When Using the
Directivity Angle at 0º Mode.")
Failure to retighten the bolts may cause the speaker to fall, resulting
in personal injury.
WARNING

Summary

Safety Precautions

Safety Symbol and Message Conventions

Explains safety symbols and message conventions used in the manual.

When Installing the Unit

Provides essential safety guidelines for installing the speaker system.

When the Unit is in Use

General Description

Features

Notes on Outdoor Installations

Dimensional Diagram

Input Section

HX-7 B;HX-7 W Input Details

Details input connectors and wiring for HX-7B and HX-7W models.

HX-7 B-WP;HX-7 W-WP Input Details

Details input connectors and wiring for HX-7B-WP and HX-7W-WP models.

Setting the Speakers Directivity Angle Mode

Directivity Angle: 0° Mode Setup

Instructions for setting the speaker's directivity angle to 0°.

Directivity Angle: 15° & 45° Modes Setup

Guides on changing directivity angle to 15° and 45° modes.

Directivity Angle: 60° Mode Setup

Explains how to change the directivity angle to 60° mode.

Using the Supplied Suspension Brackets

Optional Mounting Brackets

Optional Mounting Bracket Types

Lists and describes the various optional mounting brackets available.

Optional Bracket Installation Examples

Illustrates various installation scenarios using optional mounting brackets.

Safety Wire Installation

Equalization Using a Digital Signal Processor

Combination with the Matching Transformer

Specifications

Toa HX-7B Specifications

General

Brand	Toa
Model	HX-7B
Category	Speaker System
Language	English