Toast Flex 22 - Page 10

10
Toast Flex 22" User Guide
Precautions
Warning:
• Please insert the AC plug into the AC outlet according to the identifying input on the power
adapter.
• It is prohibited to use the device in any places with potential explosive gases.
• Nonprofessionals should not open the power adapter to avoid danger.
• Adapter should be installed near the equipment and be easily accessible.
Instruction:
• Do not use the device near water or in a humid environment.
• Keep liquid from falling on the Toast Flex.
• Do not use the device in extremely cold or hot environments, or around an open ame.
• Do not smash, throw, or bend the device.
• Use the device in a clean and dust free environment as much as possible and keep small
items from falling into the Toast Flex.
• Avoid installing or using the device in open air during inclement weather as a risk for
lighting strikes may be present.
Important Safety Instructions
• In the rare event that overheating, a burning smell, or smoke are attributed to the device,
please immediately remove power to the device by unplugging it from the wall power
socket.
• The equipment must be properly grounded. The AC plug must be connected to a properly
wired and grounded outlet.
• There is risk of re or explosion if an incorrect replacement battery is used. Only qualied
technicians should replace the battery.
• Do not attempt to open the device to access any internal ports.
Statement
The device may not be modied in any way without Toast, Inc. (“Toast”)’s permission, and
use of the device must be in accordance with this user manual. Toast is not responsible for
the following scenarios, and such scenarios or any other misuse of the device may void any
warranty protections on the device:
• Damage caused to the device due to the use or maintenance of the device not in
accordance with the user manual.
• Damage or issues caused by the combination of the device with other equipment, soware
or products not supplied by Toast.
Discrepancies between the device and the user manual may occur due to product updates.
The company reserves the right and has the sole discretion to interpret and revise the user
manual at any time without prior notice.
Setting up Your Device
It only takes a few steps to turn on this Toast Flex. Press the power button and the screen will
light up. Follow the instructions shown on the start-up screen. Two internet access modes are
available for you to select.:
WLAN Settings
1. Press the [Setting] button and start WLAN to enter the WLAN search interface.
2. Search for the available WLAN hotspots.
3. Press the WLAN to be connected. If an encrypted network is selected, a password is
required for connection.
Product Name Toast Flex 22”
Model Name: TT500, TT501
Specications: Toast Flex
User Manual
Operation System Android 12
Processor Rockchip RK3399
LCD 22-inch, 1920 x 1080 resolution
Memory 16GB ROM + 4GB RAM
WIFI Dual-band WIFI, 802.11 a/b/g/n (2.4GHz/5GHz) supported
Bluetooth Bluetooth 4.0 BLE supported
Camera 5M FF MIPI Camera
Speaker 2 x 3W
External Ports
1 x RJ45 LAN port, 2x USB TypeC port, 1x HDMI-D port,
1x USB TypeA port, 4x Micro-USB port
Power Adapter Input: AC 100-240V/1.5A Output: DC 24 V/4.0 A, 96W
Operating Temperature 0°C to 50°C
Terminal Dimensions 524 mm x 319 mm x 32.9 mm (20.6” x 12.6” x 1.3”)