5.
Cleaning Mixer
CAUTION: UNPLUG APPLIANCE BEFORE CLEANING. NEVER
PLACE ANY PART OF APPLIANCE OR CORD IN WATER OR OTHER
LIQUIDS.
1. Position speed control lever to Off.
2. Unplug from outlet.
3. Grasp stems of beaters and press down on the beater eject button.
4. Wash, rinse and dry beaters by hand after each use.
5. Wipe body of mixer with a soft, damp cloth. Do not use harsh
detergents or abrasive cleaners to clean any part.
6. Wrap cord around handle using cord wrap feature (see Figure 4).
Any servicing requiring disassembly other than the above cleaning
must be performed by a qualified appliance repair technician.
To Next Page
Loading...
