TOELLNER TOE 9260 Series - User Manual

TOELLNER Electronic Instrumente GmbH
09.10.2014
Application Note No. 9260
-
001
Power and Signal Line Interruptions
for Automotive Tests
Electronic Switch TOE 9260
9260E-AN001_Rev00.doc
R
TOELLNER ELECTRONIC INSTRUMENTE GMBH
Gahlenfeldstrasse 31, 58313 Herdecke, Germany


 +49 (0) 23 30 - 97 91 91 • Fax +49 (0) 23 30 - 97 91 97
E-Mail: info@toellner.de • Web:
www.toellner.de
Subject to technical changes

Summary

Introduction

Required test equipment

Lists components needed for test assemblies, including cables and connection accessories.

Tests according to standard LV 124

LV 124, E-10, Short interruptions

Details the test setup for LV 124, E-10, focusing on power supply line interruptions.

E-10, Short interruptions - reference measurements

Explains the procedure for reference measurements required for the E-10 short interruption test.

LV 124, Test E-13, Pin interruption

Introduces LV 124, Test E-13, covering interruptions of signal and ground pins.

E-13, interruption of signal pins

Describes the test setup for interrupting signal pins using the electronic switch.

E-13, interruption of signal pins - reference measurements

Details reference measurements for E-13 signal pin interruption tests.

E-13, interruption of ground pins

Explains the test setup for interrupting ground pins using the electronic switch.

E-13, interruption of ground pins - reference measurements

Details reference measurements for E-13 ground pin interruption tests.

Tests according to standard LV 148

LV 148, E48-09, Short interruptions

Describes the test assembly for LV 148, E48-09, focusing on short interruptions.

TOELLNER TOE 9260 Series Specifications

General

Brand	TOELLNER
Model	TOE 9260 Series
Category	Switch
Language	English