TOHATSU V20E - Oil Levels and Final Checks

20
PREPARATION FOR OPERATION
Engine oil
Refill the 2-stroke engine oil to the oil tank for V20E(S).
* Fill the tank with engine oil until the tank “UPPER LEVEL”.
The warning buzzer sounds, if the
engine oil is not enough filled.
We recommend that you use engine oil of ISO FB grade or
higher.
Always wipe off the spilled oil.
Governor oil
Before using fire pump, check governor oil level.
*Pull out governor oil gauge (dipstick), check the oil level,
the oil level should be between upper and lower line on the
dipstick. If the oil level is under the lower line, add 2-stroke
engine oil from the oil gauge port up to the upper line mark.
Drain valves
Make sure all the drain valves are closed.
6
UPPER LEVEL
LOWER LEVEL
１
１
２２
３３
４４
５５
６６
７７
８８
９
９
10
10
1111
1212
13
14
15
16
17
18
13
14
15
16
17
18