EasyManua.ls Logo

TOHATSU V20E - Engine Start Procedures; Safety and Setup Before Starting

TOHATSU V20E
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
ENGINE START
Installation pump
The temperature around the engine will become high because
of the muffler and exhaust gas, install the pump on level
ground at least three meters away from inflammable materials
including dry grass and wood.
Exhaust gas, which contains carbon monoxide,
is a deadly poisonous gas with no color and
smell.
Do not operate engine in a closed space or in
an insufficient ventilation place, such as indoor,
in the vehicle, warehouse, tunnel, well, in the
hold of a ship.
Do not start engine with discharge valve open.
Do not pump and discharge liquids other than
water (e.g. flammable liquids or chemicals).
This pump is only designed to pump water.
Do not discharge water to water-prohibiting
substance.
Do not insert your hand into the suction port to
avoid serious injury by the rotating inducer.
Do not run the pump without suction port strainer.
If gravels go into the pump, then the pump could have been
damaged and the performance would be significantly reduced.
7
1
1
22
33
44
55
66
77
88
9
9
10
10
1111
1212
13
14
15
16
17
18
13
14
15
16
17
18