TOHATSU V20E - Strainer Cleaning and Battery Charging

38
MAINTENANCE AFTER OPERATION
Cleaning strainer for prime
Remove the strainer cap and clean the strainer with
fresh water.
If the strainer is dirty with dust, etc., vacuum
performance efficiency will be reduced.
Charging battery (V20ES, V20D2S)
Hydrogen gas from the battery is explosive. Keep battery
away from flame and sparks.
Charge the battery in well ventilated area. Do not charge battery
in unventilated area.
Read the cautions attached to the battery carefully before use.
Be sure to charge the battery after each operation.
<Specification of accessory socket>
･ Voltage : DC12V
･ Max. allowable current : 5A
10
１
１
２２
３３
４４
５５
６６
７７
８８
９
９
10
10
1111
1212
13
14
15
16
17
18
13
14
15
16
17
18