To Next PageTo Next PageWhat to do if Tokai Hit Laboratory Equipment detects abnormal heating?
If your Tokai Hit Laboratory Equipment detects abnormal heating, immediately turn off the controller and inspect the Heating Plate for any issues. If you find any problems with the plate, do not use it and contact Tokai Hit. If the detection was false, turning the power off and on again should resolve the issue.
What to do if Tokai Hit Laboratory Equipment controller has an internal circuit fault?
If your Tokai Hit Laboratory Equipment controller reports an internal circuit fault, try turning the controller's main power off and then on again. If the error persists after restarting, please contact Tokai Hit or their distributor for assistance.
General| Temperature Uniformity | ±0.3°C |
|---|---|
| Temperature Stability | ±0.1°C |
| Plate Material | Aluminum |
| Display Resolution | 0.1°C |
| Power Supply | AC 100-240V, 50/60Hz |
| Temperature Accuracy | ±0.3°C |
| Heating Rate | Approx. 3°C/min |
| Control Method | PID control |
| Display | Digital LED |
Covers essential safety precautions, symbol meanings, and shipping guidelines.
Details usage/storage environments and critical installation warnings.
Explains the function of each operation key and status indicator lamp.
Step-by-step guide for connecting the heating plate and controller.
Guidelines for ensuring accurate temperature measurement and control.
Details the process to calibrate PID parameters for stable temperature control.
Guide to correct surface temperature to external sensor measurements.
Details alarm indications like ALM Lamp and Plate Lamp flashes.
Lists common error conditions and their corresponding restoration methods.
Guidance for correcting incorrect or unstable plate temperature readings.
