To Next PageTo Next PageWhat to do if my Tokai LAR-15 Car Receiver has no power or sound?
If your Tokai Car Receiver has no power or sound, it could be due to several reasons: * The car's ignition might be switched off. If the power supply is properly connected, switch your ignition key to ACC or ON. * The cable might not be correctly connected. Check the connection. * The fuse might be burnt. Replace the fuse.
What to do if USB or SD card is connecting to Tokai LAR-15 but no sound?
If your Tokai Car Receiver connects to a USB or SD card but there is no sound, the following could be the issue: * The USB or SD card connection might not be good. Try taking it out and inserting it again. * The USB or SD card might be damaged or have no music files. Try using another USB or SD card, or ensure the current one has music files on it.
Why is there so much noise in broadcasts on my Tokai Car Receiver?
If you are experiencing a lot of noise in broadcasts on your Tokai Car Receiver, the station or signal might be too weak. Try selecting other stations with a stronger signal level.
General| Brand | Tokai |
|---|---|
| Model | LAR-15 |
| Category | Car Receiver |
| Language | English |
Technical details covering power, output, channels, and dimensions.
Technical details for audio operation, including temperature and frequency response.
Instructions for turning the car radio unit on and off.
How to switch between operating modes like Radio, USB, AUX, BT.
Instructions for adjusting the audio volume.
How to temporarily silence the audio output.
Steps to pair a mobile phone with the car audio system.
Instructions for dialing, accepting, rejecting, and ending calls.
Troubleshooting steps for when there is no power or sound.
Troubleshooting steps for no sound when USB/SD is connected.
