Need help?Do you have a question about the Tokyo Keiki UFP-20 and is the answer not in the manual?
General| Type | Ultrasonic Flow Meter |
|---|---|
| Fluid Type | Liquids |
| Accuracy | ±1% of reading |
| Output | 4-20 mA, Pulse |
| Power Supply | 24 VDC or 100-240 VAC |
| Output Signal | 4-20 mA, Pulse |
| Operating Temperature | -20 to 60°C |
Defines cautionary terms like Danger, Warning, and Caution.
Describes the warning label attached to the equipment.
Guidelines for handling and using the operation manual.
Notes on the manual's content and potential discrepancies.
Rules for maintaining the equipment's condition and preventing damage.
Details the primary components of the ultrasonic flowmeter system.
Guides the user through the installation and connection process.
Provides instructions for maintaining and inspecting the transducer and main unit.
Lists the overall and main unit specifications for the flowmeter.
Explains the fundamental ultrasonic pulse propagation and calculation principles.
Contains supplementary information such as pipe length conditions and reference lists.
Addresses common questions regarding measurement and operation.
Offers solutions for common problems with the main unit, components, and measurements.
Outlines the basic steps for system setup and measurement.
Details the main unit's connection ports and display indicators.
Provides step-by-step instructions for the initial startup of the flowmeter.
Guides the selection of meter type and path settings for the application.
Provides instructions for installing various types of transducers.
Details the required parameters for setting up the flowmeter.
Summarizes the various functions of the ultrasonic flowmeter.
Provides necessary information for system operation and navigation.
Details the flow display, including numerical sections and units.
Explains the analog output function for converting flow measurement to a 4-20mA current output.
Describes the totalized value display, units, and start/stop modes.
Covers checking operational status, warnings, and self-diagnostics.
Details methods for correcting measurement values and applying averaging.
Covers transferring logged data via USB memory and configuring logging.
Explains the different measurement displays for flowmeter, massmeter, and heatmeter.
Illustrates the hierarchical structure of the device's menus.
Covers fundamental operations like selecting and changing item values.
Guides through advanced settings for pipe, lining, sensor, fluid, and unit conditions.
Details the procedure for configuring logging parameters such as interval and time.
Allows viewing input parameters and echo waveforms for diagnostics.
Explains the calibration and operation of the thickness meter function.
Covers system settings like time, meter selection, analog output, and localization.
Describes how to store, load, or delete parameter files.
Provides information on updating the device's firmware.
Provides instructions for maintaining and inspecting the transducer and main unit.
Lists the overall and main unit specifications for the flowmeter.
Explains the fundamental ultrasonic pulse propagation and calculation principles.
Contains supplementary information such as pipe length conditions and reference lists.
Addresses common questions regarding measurement and operation.
Offers solutions for common problems with the main unit, components, and measurements.
To Next Page
