Tollco WaterFuse PlugIn VFB700-DN15

Need help?

Do you have a question about the Tollco WaterFuse PlugIn VFB700-DN15 and is the answer not in the manual?

Summary

User Manual Overview

General Product Information

Details the product's purpose, installation prerequisites, and insurance considerations.

Product Handling

Instructions on how to turn the water on/off and connect monitored equipment.

Alarm System Functionality

Explains how the water sensor indicates leaks and triggers alarms.

Installation and Setup

Component Installation

Guidance for connecting the electronic unit, motorised ball valve, and water sensor.

Electronic Unit Settings

Instructions on how to change the 230v socket behavior during a water leak alarm.

The WaterFuse® - PlugIn is a water damage prevention system designed for use around equipment or in limited areas, such as under a sink unit or with a dishwasher. It is intended to prevent water damage by automatically shutting off the water supply when a leak is detected. The system can be installed with one or two motorised ball valves and one or two water sensors.

Function Description:

The core function of the WaterFuse PlugIn is to continuously monitor for water leaks using its sensors. Upon detection of water, the system triggers an alarm and automatically turns off the water supply via the connected motorised ball valve(s). The electronic unit is designed to be plugged into a standard 230V socket, which can still be used to power other appliances like a dishwasher.

The system offers both manual and automatic control over the water supply. Users can manually turn the water on or off by pressing the ON or OFF buttons on the WaterFuse PlugIn unit. The OFF button, however, only controls the water supply and does not cut off the 230V electricity to the integrated socket.

In the event of a water leak, the system provides a pulsating warning signal, and the LED indicator flashes red. To silence the alarm and address the leak, the user must press the RESET button. Once the leak is fixed and the sensors are dry, pressing the ON button will restore the water supply. If the water sensors remain wet, the alarm will reactivate, and the water will be turned off again.

A notable feature is the automatic exercise of the ball valve. If the ball valve remains open for more than three days, it will automatically exercise itself, though this action does not completely turn off the water.

The system also has a configurable setting regarding the 230V socket's power supply during an alarm. By default, the electrical socket remains functional even when a water leak alarm is active, allowing appliances like fridges, freezers, dishwashers, and washing machines to continue operating. This is based on the premise that these appliances are designed to function without a water supply during operation. However, this setting can be changed. If configured to turn off electricity during an alarm, the unit will flash RED upon startup; otherwise, it will flash GREEN. This setting can be toggled by simultaneously pressing the ON/OFF and TEST/RESET buttons for three seconds, indicated by a beep and a flashing GREEN (230V ON after alarm) or RED (230V OFF after alarm) light.

Important Technical Specifications:

Electronic Unit (EL):
- Power Supply: 230 V
- Max Power Output: 3680W
- Sensor Capacity: 1-2 water sensors
Motorised Ball Valve (VHP):
- Sizes: DN15 or DN20
- Valve Capacity: 1-2 motorised ball valves
- Features: Manual override
- Mounting: Can be mounted horizontally, vertically, or upside down, independent of flow direction.
- Thread Type: Internal R-thread.

Usage Features:

Simple Operation: ON/OFF buttons for manual water control.
Leak Detection: Continuous monitoring by water sensors.
Audible and Visual Alarm: Pulsating warning signal and flashing red LED upon water detection.
Automatic Water Shut-off: Water supply is automatically turned off when a leak is detected.
Reset Function: RESET button to silence the alarm and allow leak repair.
Integrated 230V Socket: Allows connection of other appliances, with configurable power cut-off during an alarm.
Ball Valve Exercise: Automatic exercise of the ball valve every three days if left open, ensuring its functionality.

Maintenance Features:

Installation by Qualified Professionals: The product must be installed by a person with professional knowledge to ensure correct installation and maintain warranty validity. Plumbing installations must be completed by a plumber.
Leak Testing: After installation, a leak test should be conducted.
Troubleshooting: In case of issues, users are advised to contact the dealer, read the operating instructions, and check settings before reporting a fault.
Warranty: A 1-year functional warranty is provided, in addition to the Consumer Purchase Act. The warranty covers defects in design and function under normal use and maintenance, provided the product was installed correctly and according to instructions. It covers the replacement of defective parts but excludes shipping, inspection, and assembly costs. The warranty does not cover defects from user modifications, accidents, malicious damage, deterioration due to neglected maintenance, incorrect use, or unauthorized interventions. Batteries are considered consumables and are not covered.