ABOVE GRAPHICS SHOWS THE
RIGHT SIDE OF THE BIKE
(RIDING POSITION)
D
C
DEAR CUSTOMER,
Align the through hole in the ywheel with
the ywheel protective cover. Turn the
brake knob (A) clockwise until the brake has
completely immobilized the ywheel. Use
the wired cable and key lock provided in
the packaging to then lock the ywheel to
prevent minors from using the product.
A
Re-check the amount of play in the belt as
described at the beginning of this step. If
necessary, readjust the belt.
Finally, retighten the two outer adjustment
nuts (C) and the two axle nuts (B), and
reattach the maintenance covers. To avoid
damage to the ywheel bearings, do not over
tighten the axle nuts (B). Unusual noises or
vibrations are indications that the belt has
been over tightened or that the ywheel is at
a wrong angle.
3.
To Next Page
Loading...
Need help?
General
