8.12 Removable Wheels. Patent pending.
Tomcat Pit-Stop™ removable wheels significantly reduce storage and
transportation space in the car, motor-home, garage or when shipping by domestic
or international carrier. Each wheel comes with its own protection and transport
bag and plastic sleeves are provided to protect the axles in transit.
Pit-Stop wheels are high precision components that must be kept clean to work
correctly which when assembled, are sealed against the ingress of liquids and
solids.
To prevent contamination when in transit, always use the bags and protective
sleeves provided, and only disassemble in a clean environment. Do not allow the
wheels or axles to come in contact with grit or grime. If this happens accidentally,
wash and clean both immediately with soapy water and a clean rag. Test the action
of the axle release mechanism before attempting assembly. If problems occur,
follow the instructions in the maintenance section.
• To remove a wheel, support the frame with one hand whilst pressing the central
release button with the other hand. The wheel can now be pulled from the axle.
Lower the frame to its support leg.
• To refit a wheel, slide the wheel as far onto the axle as it will go. Press the
release button with your thumb and continue pushing the wheel onto the axle
whilst rotating the wheel slowly. Continue pushing and rotating until the wheel
fully engages.
• When the wheel is fully fitted the faces of the wheel, axle and release button
will all be flush with one another as per the inset photo. If you only have two out
of three, the wheel is not correctly assembled and you must not attempt to ride
the vehicle. If problems occur see the maintenance section.
See Quick Release Wheel Fitting Video
| SIL VER BU LLE T & AR ROW
PA GE | 1 8
To Next Page
Loading...