Tomei Expreme Ti User Manual

2018_8 M-TB6090-TY04A
目次 / INDEX
このたびは弊社製品をお買い上げいただき、まことにありがとうございます。
ご使用前にこの説明書をよくお読みのうえ正しくお使いください。
お読みになった後もすぐ取り出せる場所に大切に保管してください。
説明書に書かれている注意事項は必ず守ってください。
各自動車メーカーの発行する整備要領書が必要になります。本書と合わせてお使いください。
不適切な使用により事故が生じた場合、弊社では責任を負いかねますので、
あらかじめご了承ください。
販売店様で取り付けをされる場合は本書を必ずお客様へお渡しください。
Thank you for purchasing a TOMEI product.
Please read this installation manual carefully prior to installation/use.
Ensure you keep this document stored in a safe location for future reference.
Pay close attention to and adhere to the various warnings/cautions contained herein.
You should also consult the official servicing manual for your vehicle when installing this product.
Please note that inappropriate installation/use of this product will be at the owner's own
risk and/or responsibility.
Retailers/Workshops should ensure this document is given to the end user.
TOYOTA JZX100 1JZ-GTE
TB6090-TY04A
適合
APPLICATION
品番
PART NUMBER
FULL TITANIUM MUFFLER KIT
P2
P10 English
INSTALLATION MANUAL
1

Tomei Expreme Ti Specifications

General

Brand	Tomei
Model	Expreme Ti
Category	Other
Language	English

Summary

Installation Manual Overview

Required Tools for Installation

Safety Precautions

General Cautions and Warnings

Read manual, use in closed courses, install by qualified mechanics, use correct torque, proper tools/safety gear.

Installation Safety Warnings

Install when cold. Ensure correct fitment to prevent fire hazards or damage.

Removing the Stock Exhaust

Stock Exhaust Removal Steps

Disconnect battery terminal, remove tail pipe and center pipe assemblies.

Sound Reducer Installation

Sound Reducer Modes and Hole Processing

Adjust loudness via sound reducer. Process holes for Quiet Mode 2 as per instructions.

Sound Reducer Processing Warnings

Warning: Improper hole processing can lead to loose parts, damage, or accidents.

Marking and Drilling Bolt Holes

TOMEI Titanium Exhaust Installation

Component Mounting and Torque Specifications

Diagrams and specs for mounting positions and tightening torques of all kit components.

Installation Process Steps

Exhaust System Assembly and Tightening

Assemble pipes, silencer, bands, and springs. Tighten to spec, ensure clearance.

Sound Reducer and Final Connections

Install sound reducer if needed. Secure with zip ties. Re-connect battery terminal.

Warning - Sound Reducer Usage

Do not drive at high speeds with sound reducer. Install/uninstall when exhaust is cold.

Post Installation Checks

Initial Checks and Engine Start

Verify fitment, start engine, rev to 2500rpm, and check for abnormal sounds.

Test Drive and Final Verification

Test drive, check for loose parts or abnormal sounds. Address any issues promptly.

Caution - Post-Installation Adjustments

Engine characteristics may change. Adjust engine/ECU settings as required.

Kit Contents Listing