Tomey SP-100 Service Manual

5
Service
Manual
HANDY PACHYMETER SP-100
Doc. No
3. Parts, Parts list and How to disassemble.
A) Open “1. Cover, printer” and remove “2. Printer, Paper”.
Note: When you remove printer paper, it should not be pulled from inlet part.
It will hart printer and be cause of defection of printer.
You should cut printer paper from inlet part and, pull remains from outlet side.
B) Remove “1. Cover, printer” with pushing support part toward to inside.
C) Remove “3. Stand, rear” with pushing support part toward to out side.
D) Remove “4. Self-binding screw” and remove “5. Battery cover, Assy”.
E) Remove “6. Lithium-ion battery” with pulling connector part. (Don’t pull harness).
F) Remove “7. Dust cap”.
<Page 5>

Tomey SP-100 Specifications

General

Brand	Tomey
Model	SP-100
Category	Medical Equipment
Language	English