TOMLOV CPE8881 - Wireless Bridge Specifications; Installation and Connection Guide; How to install and connect Wireless Bridge CPE

Wireless Bridge Outdoor CPE Specification：
Specification
Details
CPU
RTL8881, 533Mhz
Flash Memory
8MB
DDR Memory
32MB
5.8G WiFi
1*1 (support IEEE 802.11AC protocol, the highest rate can reach 450Mbps)
Antenna
14dBi (Horizontal lobe 60º vertical lobe 25º)
Network Interface
1*10/100M adaptive LAN port (Auto MDI/MDIX)
Indicator light
5 Green LED indicators LAN1, LAN2, 5.8G, RSSI1, RSSI2
Power Supply
Only PoE Power Supply, Not support DC Power Supply
Protocol standard
IEEE 802.11a/n/ac，IEEE 802.3/3u
RF frequency range
5180 GHz ~ 5825 GHz
Wireless channel
5GHz Channel: 149,153,157,161,165
Transmission rate
11a: 54M, 48M, 36M, 24M, 18M, 12M, 9M, 6Mbps
HT20:7.2M,14.4M,21.7M,28.9M,43.3M,57.8M,65M,72.2M,14.4M,28.9M,43.
3M,57.8M,86.7M,115.6M,130M,144.4M
HT40:15M,30M,45M,60M,90M,120M,135M,150M,30M,60M,90M,120M,180
M,240M,270M,300M
11ac(AC80):32.5M,65M,97.5M,130M,195M,260M,292.5M,325M,390M,433.
3M
Operating
temperature
-4℉~158℉
Storage
temperature
-40℉~185℉
How to install and connect Wireless Bridge CPE: