EasyManua.ls Logo

Tommee Tippee Advanced Anti-Colic - User Manual

Tommee Tippee Advanced Anti-Colic
3 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Skip to content
Manuals+
User Manuals Simplified.
Home » Tommee Tippee » Tommee Tippee Advanced Anti-Colic Instructions Manual
Tommee Tippee Advanced Anti-Colic
Instructions Manual
Advanced anti-colic
A Bottle Hood
B Teat
C Screw Ring
D Venting Wheel
E Venting Tube with Heat Sensing
F Valve
G Bottle Base
QUICKSTART
Before use, wash all parts in warm soapy water, rinse in clean water and sterilize.
Assemble your bottle as per the diagram.
When assembling your bottle it is important that you check the valve (F) by holding it to the light
to check that the slit in the silicone has not sealed closed. If it has sealed closed, pinch it gently
between your fingers to re-open. If the valve is sealed closed your bottle will not vent properly.

Other manuals for Tommee Tippee Advanced Anti-Colic

Question and Answer IconNeed help?

Do you have a question about the Tommee Tippee Advanced Anti-Colic and is the answer not in the manual?

Tommee Tippee Advanced Anti-Colic Specifications

General IconGeneral
MaterialPlastic
Age Range0+ months
Anti-Colic TechnologyYes
Dishwasher SafeYes
Bottle TypeAnti-Colic
BPA FreeYes
SterilizableYes
Teat ShapeBreast-like
Nipple TypeSlow flow
IncludesBottle, Teat
Capacity260ml (9oz)

Summary

Quickstart Guide

Initial Preparation and Assembly

Wash all parts, rinse, and sterilize. Assemble bottle per diagram, checking valve slit for proper venting.

Feed Preparation and Serving

Ensure proper venting. Prepare feed according to formula instructions and serve.

Post-Use Cleaning

After use, wash all parts in warm soapy water, rinse, and prepare for sterilization.

Cleaning and Sterilising

Cleaning Procedures

Clean before each use. Wash in warm soapy water or dishwasher. Disassemble and clean venting wheel/tube with brush.

Sterilisation Methods

All components are suitable for steam, boiling, or cold-water sterilisation.

What to Avoid

Do not use solvents, harsh chemicals, or turn teat inside out. Avoid contact with oil-based foods.

Storage and Use Guidelines

Inspection and Replacement

Inspect teat for damage before each use. Replace feeding teat every 2 months for safety.

Storage Conditions

Keep out of reach of children. Do not store in direct sunlight or near heat sources.

Microwave Heating Precautions

Remove teat, screw ring, and hood before heating. Do not heat with bottle sealed.

Child Safety and Health Warnings

Supervision and Accident Prevention

Always use with adult supervision. Prevent accidents from falls or product disassembly.

Food Temperature Checks

Always check food temperature before feeding. Stir heated food for even distribution.

Teat Usage as Soother

Never use teats as a soother to prevent tooth decay from prolonged fluid sucking.

Related product manuals