8
Remove the milk storage lid and
replace your bottle onto the bottle
stand.
11
Always check that the amount
dispensed is consistent with the
size of feed you have selected on
the dial (by adding formula, your
feed will appear larger than the feed
size chosen). Add the sterilised teat,
screw ring and hood and shake.
12 13
For your child’s safety always check
food temperature before feeding by
testing on a sensitive part of your
skin.
Your bottle is now ready to serve.
Make sure you discard any
unwanted feed as per the formula
manufacturer’s recommendation.
Press the start/stop button again.
The red light will go out and the
green light will flash. If this button is
not pressed within 2 minutes of the
hot water being dispensed a long
beep will sound. If the alarm sounds
you should discard the feed and
repeat the process from step 1.
Wait whilst the remainder of water is
dispensed. Once completed, there
will be a double beep and the green
light will change to solid.
HOW TO STOP THE PERFECT PREP™ MACHINE
If at any point you need to stop the Perfect Prep machine you can do so by pressing the start/stop button. The pump may
continue to run for a few seconds and the green light will illuminate to show that the process has ended.
It will not be possible to restart the machine for 20 seconds. If you have to stop the Perfect Prep machine, please discard of
any incomplete feed.
The light will change to solid red
and there will be a double beep to
indicate the end of the first stage.
You will need to make up your feed
within 2 minutes.
Carefully remove the bottle from the
stand and measure the correct
number of formula scoops into the
bottle.
Screw the sterilised milk storage lid
onto the bottle and ensure that the
lid is tight. Be careful when handling
hot liquid.
Shake well until the formula powder
has dissolved.
4 5 6 7
9
10
11
12 13
The Perfect Prep should be kept in a cool dry location,
avoiding direct sunlight and keeping away from warm
appliances. This is recommended to avoid the water tank
temperature getting too warm.
Don’t worry if your temperature light does illuminate, as we
have some tips for you:
HOW TO KEEP THE TANK COOL
Flush your cold tap for 10 seconds before filling the
water tank.
1
Regularly top up with cold water rather than letting a
full tank stand and warm for long periods of time.
2
Keep a cold jug of tap water in the fridge ready to top
up the tank.
3
To Next Page
Loading...
