Once you have finished expressing or when the pouch is full, unscrew from the pump and replace the
screw cap
Pouches should be marked and dated for reference using a soft tipped marker so as not to damage
the bag. Depending on how the milk freezes in the bag, you may not get an accurate read so we
recommend recording the volume expressed in the ‘notes’ section
DISASSEMBLE THE REST OF THE UNIT AND STERILIZE ALL PARTS AS PER MANUFACTURERS
GUIDELINES
2. ASSEMBLING THE POUCH HOLDER
Ensure all pouch holder and nipple parts have been washed and sterilized as per guidelines before use
Leaving hood on nipple, attach to screw ring adapter
Place pouch in to the holder and click in to place. Ensure the measurement markings are facing
outwards – remove screw cap once in place
To Next Page
Loading...
Need help?
General
