Tommy Docks Classic+ - Page 6

5
Loosen Bracket Adjusting Bolt (5a) and let Post slide down to the bottom of the lake (5b). Once the dock is at desired
height (12” is recommended) (5c), tighten Bracket Adjusting Bolt (repeat this step for each Bracket) (5d). Repeat steps
2-5 for each dock section to be installed.
Note: Refer to dock layout for proper dock configuration.
6
www.tommydocks.com
5a
5c
5b
Bracket
Adjusting Bolt
12” above
water
5b
3/4”