Tommy Docks Classic+ - Page 7

6
If using Auger Feet, slide the Footpad up to the desired depth (Footpad depth depends on bottom surfaces such as hard,
soft, or rocky conditions, etc.) (6a) and tighten Bolt at the top of the Footpad to secure its position (6b). Position the
Auger at the bottom of the Post (6c). Once in position, tighten the two Bolts on the Auger Foot until they are secure (6d).
Slide Post down until the Auger touches the bottom of the lake (6e). Attach a post wrench to the Post and turn clockwise
until the Footpad touches the bottom of the lake.
7
www.tommydocks.com
Post
Bracket
Water Line
Auger
Hard, sandy or gravel
lake bottom conditions
Soft soil or muck
lake bottom conditions
6a
6b
Bolt
Footpad
(slide upward
to desired depth)
6d
Bottom of
Post
Auger
Bolt
6c 6e
Bottom of lake
9/16”
9/16”