TomTom GO 6200 Troubleshooting Guide

If your navigation device shows as not connected, check the connection between your navigation
device and your computer. more
Windows
Mac OS X
 Reset your navigation device and make sure that your device is switched on before you
connect it to the computer.
[ show me how... ]
 Connect your navigation device to a different USB port on your computer.
You should plug the USB connector directly into a USB port on your computer and not
into a USB hub or USB port on a keyboard or monitor.
 We recommend that you always use the original USB cable provided with your device,
however, in rare cases the USB cable may have developed a fault. To test this, try
connecting your device using a different USB cable.
 Make sure you are logged in as an 'Administrator' to ensure that you have sufficient rights
to connect new hardware to your computer.
 Make sure you have the latest Service Pack for Windows installed.

TomTom GO 6200 Specifications

General

Auto	Yes
Marine (chartplotters, sounders)	No
Languages support	Multi
Traffic Message Channel (TMC)	-
Map coverage	All Europe
Lifetime map updates	Roads change, but with Lifetime Map Updates your map will always be up to date. Start fresh every few months by downloading a new edition of the industry's most accurate map. New editions are issued four times per year.
Pixel density	154 ppi
Display diagonal	6 \
Display resolution	800 x 480 pixels
Storage media type	Flash
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Internal storage capacity	16 GB
Form factor	Fixed
Product color	Black, Grey
Supported radio bands	Not supported
Power source type	Battery, Cigar lighter
Battery life (max)	1 h
Cables included	USB

Weight and Dimensions

Width	- mm
Weight	- g