4
GET GOING
Device mounting
1. Connect your device’s USB cable to the mount
2. Connect the other end of the USB cable to the charger
3. Insert the charger into your vehicle’s power socket
4. Place your mount on a smooth surface (e.g., your windshield, driver’s side window,
dashboard)
Make sure that your device does not obstruct your dashboard, vehicle controls, rear-viewmirrors,
airbags and field of vision. To maintain an optimal satellite signal, ensure that your device
remains upright during use.
NOTE: To ensure that your TomTom GO Discover’s high definition screen remains suciently
powered throughout your drives, we advise you to (i) confirm the strength (i.e., voltage) of
thepower supplied by your vehicle Car Power Adapter or USB port and (ii) use the charger
included with your TomTom GO Discover accessories for optimal performance.
Powering on and o
Switch on your device by pressing the On/O button
Press and hold the On/O button for two (2) seconds then tap eitherTurn oorSleepto switch
o your device or to activate sleep mode.
Pressing and holding the On/O button for more than five (5) seconds will switch o your
device.
Sharing information with TomTom
Upon activating your TomTom GO Discover (i.e., during the First Run Wizard), we will ask for
your consent to share data about yourlocations and stored routes.
Doing this will help us improve our products.The collected information will be stored on your
device until we retrieve andanonymizeit. If you use TomTom Services (e.g. live trac, speed
camera alerts), we will use your location information to deliver these services to you. Once you
have set up your information sharing preferences, you can adjust them as follows:
1. Go toSettingsin the main menu
2. TapSystem
3. ThenYour information and privacy
4. Now turn o information sharing
To see more about what we are doing to protect your privacy, please visittomtom.com/privacy
NOTE: Information sharing allows for the smooth operation of TomTom Services including trac,
speed cameras, fuel pricing information, EV charging POIs, and o-street parking. Withholding
consent to share your location information will disable your TomTom Services.
Caring for your TomTom GO Discover
To ensure optimal device performance:
1. Do not open your device’s housing. Doing so is dangerous and will invalidate your device’s
warranty.
2. Use a soft cloth to wipe and dry your device’s screen. Avoid using liquid cleaners.