TomTom - Mazda NB1 Voice Recognition Instructions - July 2012
If you select “No” for this screen you move to the next screen. Here you can use the commands to change the house
number, street name, city or state.
IIf you select “Change streetname” or any of the other “Change”
commands from either of the two screens above you see the
screen on the right.
Speak the corrected streetname or city. After doing so you will
go back to either of the two screens above where you came
from.
Example:
Setting a destination using
POI or brand name
You can navigate to a Point of Interest (POI) or a
limited set of brandnames using your voice.
You can say for example:
• Navigate to nearest Shell
• Navigate to gas station
• Take me to McDonalds
• Instructions for restaurant
This document includes a list of brand names and
POI categories that are known to your device.
If you make a mistake, please wait for the system to
finish and say “‘Start over” in response to the next
prompt.
You can click “More info” to see a list of possible
commands but you should not do this while driving.
For the rest of the screens shown during route
calculation, you can also use your voice to control
the screen. For example, when your device asks if
you want to use toll-roads you can say “No” instead
of touching the screen.
“Na
vigate to <POI/Brandname>”
Your device matched your voice input to a list of
possible addresses. You can now say:
• 1..5 -> Selects the item in list.
• Start over -> New input.
• Cancel -> Abort completely.
To Next Page
Loading...
Need help?
General
