For the quickest route, select Minimise traffic delays [2][6]. TomTom
MOBILE will calculate the quickest route taking into account traffic delays. Select
Recalculate original [2][4] to return to a route ignoring traffic delays.
Note: You can set TomTom MOBILE to always minimise traffic delays in Change
Traffic preferences [3][5]. TomTom MOBILE will then replan when a traffic incident
is reported, changed or cleared within 50 miles (80 km) from your route.
Note: MOBILE will use all roads to calculate the quickest route, but traffic information
is not available for all roads.
Note: In some cases the quickest route runs through a traffic jam
To avoid a single incident on your route completely, select Show traffic info
[3][2], select the incident with the joystick and select Avoid . MOBILE will now plan
a route avoiding this incident entirely. Avoided incidents are displayed in the map and
route scheme like this:
If you chose to minimise traffic delays on your previous route [2][6], this will apply
to the new route as well, but the selected incident will always be avoided completely.
To clear the avoid, open
Show traffic info [3][2], select the incident again
and select Clear. MOBILE will now plan a new route without avoiding the incident.
Note: Use shortcut key [3][3] to update traffic information manually. In
Change Traffic Preferences [3][5] you can configure TomTom MOBILE to
automatically update traffic at regular intervals when driving.
Traffic Preferences
In Change traffic preferences [3][5] you can set the following options:
To Next Page
Loading...
Need help?
General
