TomTom ONE Manual

9
9. When the route has been calculated, tap Done .
TomTom GO will immediately start guiding you to your destination with spoken
instructions and visual instructions on the screen.
Arrival times
Tap YES to enter an arrival time.
Your GO calculates your arrrival time and shows you whether you will arrive on
time.
You can also use this information to work out when you need to leave. If your GO
shows you that you will arrive 30 minutes early, you can wait and leave in 30
minutes time, rather than arrive early.
Your arrival time is constantly recalculated during your journey. The status bar
shows whether you will arrive on time or late, as shown below:
Note: Before you can plan a route in this way, TomTom GO must first locate
your current position.
You will arrive 55 minutes before the arrival time you entered.
If the estimated arrival time is more than five minutes before the
time you entered, it is shown in green.
You will arrive 3 minutes before the arrival time you entered.
If the estimated arrival time is less than 5 minutes before the
time you entered, it is shown in yellow.
You will arrive 19 minutes late.
If the estimated arrival time is later than the time you entered, it
is shown in red.

TomTom ONE Specifications

General

Auto	Yes
Marine (chartplotters, sounders)	No
Display resolution	480 x 272 pixels
Display number of colors	65536 colors
Display size (HxV) (imperial)	4.3 \
Internal memory	1024 MB
Processor frequency	266 MHz
Bluetooth version	2.0+EDR
Battery life (max)	2 h
Operating temperature (T-T)	-10 - 55 °C

Weight and Dimensions

Depth	27 mm
Width	119 mm
Height	86 mm
Weight	208 g