95
The first time you use +RPHWRZRUN, you must set your traffic home and work locations.
You can now use the +RPHWRZRUN and :RUNWRKRPH buttons.
Note:
The home location you set here is not the same as the home location you can set
in the
Settings Menu
. In addition, the locations you use here do not have to be your actual
home and work locations. If there is another route that you often travel, you can set Work/
Home to use these locations instead.
For example, to check for delays on your route home before you leave the office, do the
following:
1. Tap the traffic sidebar to open the Traffic menu.
2. Tap 6KRZKRPHZRUNWUDIILF.
3. Tap :RUNWRKRPH.
The Driving View is shown and a message is displayed telling you about traffic incidents
on this route. The Traffic sidebar also shows any delays.
*HWWLQJPRUHLQIRUPDWLRQDERXWDQLQFLGHQW
To check for delays on your route, tap 6KRZWUDIILFRQURXWH in the Traf fic menu. Your
navigation device shows a summary of the traf fic delays on your route.
The total includes any delays due to traffic incidents and those due to busy roads, with
information provided by IQ Routes.
Tap 0LQLPLVHGHOD\V to check if you can reduce the delay.
&KDQJHKRPH
ZRUN
1. Tap the traffic sidebar to open the Traffic menu.
2. Tap 6KRZKRPHZRUNWUDIILF.
3. Set your home location and your work location.
If you have already set the locations and want to change them, tap
&KDQJHKRPHZRUN.