EasyManua.ls Logo

Tonino Lamborghini PC 41 TL User Manual

Tonino Lamborghini PC 41 TL
160 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
GB
PETROL CHAINSAW - Translation of the original Operating Instructions
Caution
Before using our chain saws, please read this manual carefully to understand the proper use of
your unit.
Keep this manual handy.
Warning
This chain-saw is for trained tree service operators only, see instruction handbook!
RU
МОТОРНОЙ ПИЛЫ - Перевод с оригинального руководства по эксплуатации
Внимание
Перед использованием наших изделий необходимо прочитать внимательно это
Руководство, чтобы понять, как использовать их правильно.
Всегда держать Руководство по эксплуатации вместе с цепной пилой.
Предупреждение
Эта цепная пила предназначена только для подготовленных операторов по поддержке
деревьев, см. «Руководство по эксплуатации».
FR
TRONÇONNEUSE THERMIQUE - Traduction du mode d’emploi d’origine
Attention
Avant d‘utiliser nos scies à chaîne, veuillez lire attentivement ce manuel an de bien en
comprendre l‘utilisation.
Gardez ce manuel à portée de main.
Avertissement
Cette scie à chaîne est destinée aux opérateurs formés de service d’entretien des arbres
uniquement, voir mode d’emploi!
IT
BENZINA MOTOSEGA - Traduzione delle istruzioni per l‘uso originali.
Attenzione
Prima di utilizzare le nostre seghe a catena, leggere attentamente il presente manuale d’uso al
ne di comprendere l’uso appropriato del nostro apparecchio.
Tenere il presente manuale sempre a portata di mano.
Attenzione
Questa sega a catena è destinata soltanto ad operatori addestrati alla manutenzione degli alberi,
vedi manuale di istruzioni
DE
BENZIN MOTORSÄGE - Originalbetriebsanleitung
Vorsicht
Lesen Sie dieses Handbuch sorgfältig und machen Sie sich mit der ordnungsgemäßen Nutzung
Ihrer Kettensägen vertraut, bevor Sie diese in Betrieb nehmen.
Bewahren Sie dieses Handbuch griffbereit auf.
Warnung
Diese Kettensäge ist nur für geschulte, in der Baumpege tätige Bediener geeignet, siehe
Bedienungsanleitung!
PL
SPALINOWA PILARKA ŁAŃCUCHOWA - Tłumaczenie oryginalnej instrukcji obsługi
Uwaga
Przed użyciem pilarki należy przeczytać dokładnie instrukcję obsługi, aby zrozumieć prawidłowe
użycie.
Instrukcję trzymać w pobliżu
UWAGA
Ta pilarka łańcuchowa jest przeznaczona tylko dla wyszkolonych operatorów, przeczytać instrukcję!
PT
MOTOSERRA A GASOLINA - Tradução do manual de instruções original
Atenção
Antes de usar a nossa gama de motoserras, por favor leia antentamente este manual, para
compreender o uso apropriado deste equipamento.
Guarde estas instruções para uso sempre com a motosserra.
Aviso
Esta motoserra é para operadores de serviço treinados, em operações de serragem de árvores,
consulte o manual de instruções.
PC 41 TL
HU
BENZINES LÁNCFŰRÉSZ - Az eredeti használati utasítás fordítása
Fontos
Termékeink használata előtt gyelmesen olvassa el az utasításokat, hogy meg tudja érteni azok
helyes működését és használatát.
A kézikönyvet könnyen hozzáférhető helyen kell tárolni.
Veszély
A képzett felhasználók a láncfűrészt álló fa koronájának vágására is használhatják.
73710869-02
Made in
China

Table of Contents

Questions and Answers:

Tonino Lamborghini PC 41 TL Specifications

General IconGeneral
BrandTonino Lamborghini
ModelPC 41 TL
CategoryChainsaw
LanguageEnglish

Summary

Chainsaw Safety First Guidelines

General Safety Instructions

Emphasizes reading and following all safety instructions marked with symbols to prevent injury.

Understanding Warning Symbols

Explains the meaning of WARNING, IMPORTANT, and NOTE symbols for safe operation.

Device-Specific Safety

Covers essential safety measures like body clearance, hand positioning, and protective gear.

Intended and Unintended Use of the Chainsaw

Chainsaw's Primary Applications

Details the chainsaw's purpose for cutting trunks, square timbers, and branches, and for pruning tree crowns.

Prohibited Chainsaw Applications

Lists uses the chainsaw is not designed for, such as cutting plastics or brickwork.

Potential Chainsaw Hazards and Risks

Identifies residual risks like chain contact, unexpected movements, and noise exposure.

Chainsaw Parts Identification

Identifying Chainsaw Components

Diagram and list detailing key parts of the chainsaw for user reference.

Chainsaw Safety and Operation Symbols

Mandatory Operation Symbols

Explains symbols indicating the need to read the manual, wear protection, and use two hands.

Kickback Warning Symbol

Highlights the symbol warning about the danger of kickback.

Control and Adjustment Symbols

Details symbols for refueling ports, engine stop, choke operation, and oil pump adjustment.

Chainsaw Safe Operation Procedures

Pre-Operation Checks and Precautions

Instructions before use, including reading the manual and avoiding operation when fatigued or under influence.

Safe Operating Environment

Guidance on operating in well-ventilated areas and avoiding adverse weather conditions.

Safe Fuel Handling and Storage

Precautions for handling flammable gasoline, including avoiding sparks and spills.

General Chainsaw Safety Practices

Covers safe practices like maintaining a 10m distance, firm grip, and avoiding contact with the chain.

Kickback Safety Prevention

Detailed advice on understanding and preventing kickback, a major hazard.

Guide Bar and Saw Chain Installation

Chainsaw Unit Package Contents

Lists the standard components included in the saw unit package.

Step-by-Step Installation

Detailed instructions for correctly installing the guide bar and saw chain.

Proper Chain Tensioning

Guidance on adjusting chain tension for optimal performance and safety.

Chainsaw Fuel and Chain Oil Management

Recommended Fuel Mixture Ratio

Specifies the correct 40:1 gasoline to two-cycle oil ratio for the engine.

Safe Fuel and Oil Handling Precautions

Warnings and advice on handling fuel and oil, including correct types and storage.

Correct Chain Oil Usage and Maintenance

Instructions on using special chain saw oil and ensuring the oil tank is kept full.

Chainsaw Operation Procedures

Chainsaw Engine Starting Procedure

Step-by-step guide on how to start the chainsaw engine, including priming and choke use.

Verifying Chainsaw Oil Supply

Method to check if the chain oil system is functioning correctly after starting.

Chainsaw Clutch Function Check

Ensuring the chain does not move at idle speed before use.

Carburetor Adjustment for Optimal Performance

Instructions for fine-tuning the carburetor for best cutting power.

Chainsaw Chain Brake Operation and Checks

Explains chain brake function, manual activation, and daily checks for effectiveness.

Carburetor Anti-Freeze Mechanism

Details how to switch to anti-freeze mode for operation in cold, humid conditions.

Chainsaw Engine Stopping Procedure

Simple steps to safely stop the chainsaw engine.

Chainsaw Sawing Techniques

General Sawing Safety Precautions

Emphasizes safety regulations, proper use for wood cutting, and avoiding misuse.

Guarding Against Kickback During Sawing

Ensures chain brake functionality and sharp chain for kickback safety.

Chainsaw Tree Felling Techniques

Guidance on planning, making notch and felling cuts, and felling direction.

Logging and Limbing Techniques

Methods for cutting logs and limbing felled trees, including safety warnings.

Chainsaw Pruning Techniques

Instructions for cutting branches from bottom up and top down.

Chainsaw Maintenance

Pre-Maintenance Safety Precautions

Crucial safety steps before performing maintenance, like stopping the engine and disconnecting the spark plug.

Daily Chainsaw Maintenance Checks

Tasks to perform after each use, including cleaning the air filter, oiling port, and guide bar.

Periodic Chainsaw Service Points

Regular checks and cleaning for cylinder fins, fuel filter, oil tank, and spark plug.

Sprocket Inspection and Replacement

Checking the sprocket for cracks and wear, and advice on replacement.

Front and Rear Damper Inspection

Checking for damage or peeling on the rubber damper parts.

Saw Chain and Guide Bar Maintenance

When to Sharpen Chainsaw Cutters

Indicators that the chainsaw cutters need sharpening, like sawdust texture and cutting effort.

Chainsaw Cutter Setting Standards

Detailed specifications for file diameter, angles, and depth gauge for sharpening.

Guide Bar Maintenance and Wear Check

Instructions for reversing the bar and checking for wear on the bar rail.

Approved Guide Bar and Chain Combinations

Lists compatible guide bar and chain types for the PC 41 TL model.

Chainsaw Storage Instructions

Preparing Chainsaw for Storage

Steps to prepare the unit for storage, including emptying fuel and oil tanks.

Proper Storage Location for Chainsaw

Advice on storing the unit in a dry place, out of reach of children.

Chainsaw Waste Disposal and Environmental Protection

Disposal of Lubricant and Fuel Mixture

Guidance on proper disposal of chain lubricant and 2-stroke fuel mixture.

Environmentally Friendly Unit Disposal

Instructions for disposing of the device and its parts in an environmentally friendly manner.

Chainsaw Warranty Information

Chainsaw Warranty Terms and Period

Details the warranty period for commercial and private use, and exclusions.

Chainsaw Hotline and Service Support

Contact information for expert assistance, technical questions, and service.

Chainsaw Troubleshooting Guide

Troubleshooting Chainsaw Starting Failures

Addresses common starting issues like fuel problems, flooding, and ignition.

Troubleshooting Chainsaw Power and Idling Issues

Solutions for lack of power, poor acceleration, and rough idling.

Troubleshooting Chainsaw Oil Delivery Problems

Diagnosing and resolving issues with the chain oil not coming out.

Chainsaw Technical Specifications

Chainsaw Power Unit Specifications

Detailed technical data for the engine, fuel, and oil systems.

Chainsaw Cutting Attachment Specifications

Specifications for the guide bar, chain type, pitch, and gauge.

EC Declaration of Conformity for Chainsaw

Statement of compliance with relevant safety and health requirements.