Tonka Playskool User Manual

*
OVER 9 months
to 3 years
91056
Scoot ’n Scoop 3-in-1 Ride-on™
with Revvin’ Beepin’ Wheel™
Thank you for choosing this TONKA toy!
Includes REVVIN’ BEEPIN’
WHEEL, truck body, seat,
gravel guard, rear axle
assembly, 2 screws,
3 plastic blocks and
instructions.
Adult supervision
required.
x3
BATTERIES INCLUDED
1.5V AA or R6 size
Replace with 3 x 1.5V “AA” or R6 size batteries.
Alkaline batteries recommended. Phillips/cross
head screwdriver (not included) needed to
replace batteries.
1
Push
(9+ months)
2
Walk
(12+ months)
3
Ride
(18+ months)
This product contains small
parts which are necessary for
assembly. Prior to and during
assembly of this product, keep
small parts out of children’s
reach. Small parts pose a
choking hazard to children
under 3 years.
TO AVOID SERIOUS INJURY: continuous adult supervision required;
never use near motor vehicles, near streets, swimming pools, hills,
steps, or sloped driveways. Always wear shoes. Allow only one rider.
WARNING:
™
Adult assembly
and Phillips/
cross head
screwdriver
(not included)
required.
For children up to
42 pounds (19 kg).

Tonka Playskool Specifications

General

Category	Toy
Brand	Tonka
Manufacturer	Hasbro
Product Dimensions	Varies by product
Age Range	Varies by product
Material	Plastic
Theme	Construction, Vehicles

Summary

Tonka Scoot 'n Scoop 3-in-1 Ride-on Overview

Age and Supervision Requirements

For children 9 months to 3 years; requires continuous adult supervision during use.

Included Parts and Assembly Tools

Lists toy components and notes that a Phillips/cross head screwdriver is needed for assembly.

Choking Hazard and General Safety

Contains warnings about small parts posing a choking hazard and general safety precautions.

Weight Limit and Battery Details

Specifies a 42-pound weight limit and notes that batteries are included.

Toy Assembly Instructions

Basic Assembly

Attach the rear axle assembly to the truck body using the two included screws.

Push Mode Setup

Ensure the seat and gravel guard are locked in the 'down' position for push mode.

Walk Mode Setup

Instructions for removing and attaching the seat to the 'up' position for walk mode.

Ride-on Mode Setup

Steps to attach the seat in the 'down' position, noting its necessity for riding.

Revvin' Beepin' Wheel Integration

Attaching the Revvin' Beepin' Wheel

Detailed steps to attach the Revvin' Beepin' Wheel to the truck body and gravel guard.

Detaching the Revvin' Beepin' Wheel

Instructions on how to safely remove the Revvin' Beepin' Wheel from the toy.

Playing with the Tonka Toy

Revvin' Beepin' Wheel Features

Describes the interactive features of the wheel, including sounds, lights, and adjustable mirror.

Scooping Action and Play Modes

Explains how to use the scooping action and the toy's three play modes: push, walk, and ride.

Accessory Compatibility

Mentions that the wheel can be used alone or with other sold-separately accessories.

Battery Replacement and Safety

Battery Compartment Access

Locate and open the battery compartment cover on the Revvin' Beepin' Wheel.

Battery Leakage Precautions

Provides precautions to avoid battery leakage and damage to the product.

Important Battery Information

General guidelines for battery usage, replacement, and precautions for safe operation.

FCC Statement

Information regarding compliance with FCC rules for digital devices and radio frequency energy.