TONOR K6 - Troubleshooting Common Issues; Power, Sound, and Response Problems; Remote Control Malfunctions

Deutsch
12
No power
- Ensure that the Adapter plug of the speaker is connected properly.
- Ensure that there is power at the DC outlet.
No sound or poor sound
- Adjust the volume.
- Disconnect the headphones.
- Check that the speakers are connected correctly.
- Check if the stripped speaker wires are clamped.
No response from the speaker
- Disconnect and reconnect the Adapter plug, then turn on the
speaker again.
Remote control does not work
- Before you press any function button, first select the correct source
with the remote control instead of the main unit.
- Reduce the distance between the remote control and the unit.
- Insert the battery with its polarities (+/-signs) alignedas indicated.
- Replace the battery.
- Aim the remote control directly at the sensor on the front of the
speaker.
SEHRGEEHRTERKUNDE
UmdieoptimaleLeistungIhresProduktszuerzielen,lesenSiebitte
dieseBedienungsanleitungvorderVerwendungsorgfältigdurchund
bewahrenSiesiezumspäterenNachschlagenauf.
VORSICHT
STROMSCHLAGGEFAHR,NICHTÖFFNEN
Vorsicht:ÖffnenSiediesesGerätnicht,umdasRisikoeines
elektrischenSchlageszuverringern.EsgibtkeineTeile,dievom
Kundengewartetwerdenkönnen.BitteüberlassenSieWartungs-
oderReparaturarbeiteneinemqualifiziertenFachmann.